Page 4 - Catelogue - hack It Jules

HACK IT, JULES! www.ikeahackers.net

1

Unpack all 4 sets of RAST. The shorter panels
are slightly deeper (30cm) than the longer
ones. We trimmed them (C, D, G, H, L, M,
P, Q) down so to 29.6cm that the finish is
neater. Do measure the depth of your set of
RAST before trimming. We’ve found that the
measurements aren’t always standard.

2

To make the centre open shelves: Cut board A
into 2. Then make holes for the shelf dowels.
We went with 3 holes on each side. Do the
same for board C. Trim board B to 48.2cm.

3

Then assemble the pieces according to Fig 2.
Use a butt joint to fix A1 with E and C to E as
well. B is a removable shelf, sitting on dowels.