Page 5 - Catelogue - hack It Jules
P. 5
HACK IT, JULES! www.ikeahackers.net
4
Repeat, using A2 instead of A1. Set aside for assembly later.
5
To make the door cubbies. Cut board K into
2 and again drill 3 holes on each side for the
shelf dowels.
6 7 8
Cut L and M according to the Cut board N for the door and back Assemble accordingly, butting N2
measurements. They form the top of the cubby. Drill a hole into the against M and G. Drill in from G
and bottom panel of the cubby. top and bottom cross-section of towards M to secure the bottom.
For L, drill a hole for the metal N1. Insert dowels into these holes. Fix K1 to M too.
dowel in the top left corner. For M,
at the bottom left.
